 |
Three Screw Pump
Manufacturer and exporter of three screw pumps from Toptime Group Co.,Ltd. which a very famous electric & industrial foreign trade Company in China. It has 4 important subsidiaries, which covers the products of electrical appliances, pump & valve, auto fittings and building materials. We can offer you the most superior three screw pump products on the market today and you also can feel free to tell us your requirement about three screw pump.
Screw pumps for power transmission systems are generally used only on submarines. Although low in efficiency and expensive, the screw pump is suitable for high pressures (3000 psi), and delivers fluid with little noise or pressure pulsation.
Screw pumps are available in several different designs; however, they all operate in a similar manner.
The three-screw, high-pitch, screw pump, has many of the same elements as the two-screw, low-pitch, screw pump, and their operations are similar. Three screws, oppositely threaded on each end, are employed. They rotate in a triple cylinder, the two outer bores of which overlap the center bore. The pitch of the screws is much higher than in the low pitch screw pump; therefore, the center screw, or power rotor, is used to drive the two outer idler rotors directly without external timing gears. Pedestal bearings at the base support the weight of the rotors and maintain their axial position. The liquid being pumped enters the suction opening, flows through passages around the rotor housing, and through the screws from each end, in opposed streams, toward the center discharge. This eliminates unbalanced hydraulic thrust. The screw pump is used for pumping viscous fluids, usually lubricating, hydraulic, or fuel oil. |
 |
